Roomba with mop

How to Set up Roomba With Mop

Roomba with mop and vacuum is a blessing in disguise. The Roomba mop robot is also very easy to setup with the help of the iRobot Home app. Roomba with mopping feature makes your job of house cleaning easy. Now you don’t have to worry about the day-to-day cleaning job of your house as Roomba with mop will take care of it. Roomba mop robot helps you concentrate your time and efforts on other household tasks, leaving behind the cleaning task for the Roomba vacuum cleaner.

This post will help you learn how to set up and configure your mop robot with the help of the mobile app i.e., iRobot Home app. The iRobot Home app is dedicated to only Roomba vacuum cleaners. The application is freely available on the Play Store and the App Store. Let’s learn how to configure your Roomba with a mopping feature.

Roomba with mop setup

Now, we will show you how to set up your Roomba mop robot with the help of this section. We have penned down all the instructions to configure and activate your Roomba’s mopping feature. Kindly follow the steps below:

  1. Firstly, it is important for you to download and install the iRobot Home app on your mobile device. 
  2. The iRobot Home app is available for free on the Play Store and the App Store.
  3. After that, place the home base station in an area well within the reach of your WiFi network.
  4. Place the Roomba mop robot on the home base and connect it to the power outlet.
  5. Adequate power should be supplied to the Roomba with mop device.
  6. Now it’s time to connect the Roomba vacuum cleaner to a WiFi network.
  7. The iRobot Home app will show up the WiFi network name that your device (smartphone or tablet) is connected to. 
  8. Cross-check the WiFi network name that you would like to use further for the Roomba mopping device.
  9. Thereafter, put down the Wifi password or key of your network. The iRobot Home app will attempt to connect Roomba to WiFi.
  10. Activate the Roomba with mop device by pressing the Home and SPOT Clean simultaneously.
  11. Kindly ensure that you hold both buttons for at least 2 seconds.
  12. At last, you will come across a series of tones and Roomba will flash a free WiFi light.

Finally, the mop robot will be set up and configured successfully.

Final thoughts

This post was all about how to set up, configure, and activate the iRobot Roomba with mopping feature. We hope you found this post helpful and easy. It is pretty easy to set up and activate your device with the help of the iRobot Home app.

If you come across any issues in the middle of the configuration, make sure the WiFi network is free from issues. If you still see any issues or problems showing up on your Roomba with mop device, make sure you reach out to our support team for more help.

Leave a Comment

Your email address will not be published. Required fields are marked *